XZS100-G-□ Explosion-proof furnace flame monitoring (flame TV explosion-proof camera) is an explosion-proof monitoring equipment used for flame observation. The special situation of radiation temperature that occurs when observing the flame is fully considered in the structural design. In order to avoid radiation If the temperature exceeds the surface temperature of the explosion-proof enclosure specified in the explosion-proof standards, a gas heat insulation shield will be installed outside the explosion-proof shield, and the explosion-proof enclosure will be forced to be purged with uninterrupted compressed gas. When the compressed gas used in the gas heat insulation shield meets the gas flow rate, air pressure and inlet temperature calculated during design, air pressure will be formed between the gas heat insulation shield and the explosion-proof shell to take away the heat radiation, effectively ensuring that the explosion-proof shield The surface temperature is always kept below the surface temperature of the explosion-proof explosion-proof shell to avoid damage to the monitoring equipment. At the same time, it can effectively purge the accumulation of dust from high-temperature equipment in the observation window.

 Explosion-proof mark: Ex db IIC T6 Gb/Ex tb IIIC T80℃ Db

 Ingress Protection (IP) degree:IP68(2m/2h)

Working environment conditions：

   ① When the explosion-proof shield is continuously purged by compressed gas: the operating ambient temperature is: -40℃～+60℃

   ② Can be used in Zone 1 and Zone 2 hazardous locations of IIA, IIB, and IIC explosive gas environments or Zones 21 and 22 of IIIA, IIIB, and IIIC combustible dust environments;

   ③ Suitable for environments with temperature groups T1-T6;

   ④ It is suitable for petroleum, petrochemical, chemical, pharmaceutical, paint, textile, winemaking, printing and dyeing, food processing, storage and transportation of dangerous goods, etc., and dangerous environments with explosive gas and combustible dust.

Power supply：

 Working voltage: 12VDC/PoE, working current: ≤1500mA 

 Working voltage: 100VAC～240VAC (AC/DC power adapter), working current: ≤1000mA

Camera Electrical Specifications：

 For the technical specifications of the camera, please refer to the instruction manual of the optional product。

Uninterrupted compressed gas meets the following gas supply conditions, and when the radiation temperature of the industrial furnace is ≤2000 C°, the surface temperature of the explosion-proof equipment can be kept below the technical requirements:

  ①Compressed gas temperature ≤40C°

  ②Compressed gas pressure: ≥0.2Mp

Explosion-proof furnace flame monitor、 installation base plate、installation bracket