XZS200 explosion-proof wiper camera, this product is designed and manufactured in strict accordance with GB/T3836.1-2021 standard, and can be widely used in hazardous environments with explosive gas and combustible dust except coal mines. Aliases: explosion-proof wiper camera, explosion-proof self-cleaning camera, automatic dust-proof explosion-proof camera.

    Explosion-proof mark: Ex db IIC T6 Gb/Ex tb IIIC T80℃ Db

    Explosion-proof type: explosion-proof type / combustible dust explosion-proof type

Working environment conditions：

   ① Suitable for Zone 1 and Zone 2 in explosive gas environment;

   ② Suitable for IIA, IIB, IIC class explosive gas environment;

   ③ Applicable to Zone 21 and Zone 22 in combustible dust environment;

   ④ Suitable for environments with temperature groups T1-T6;

   ⑤ It is suitable for petroleum, petrochemical, chemical, pharmaceutical, paint, textile, winemaking, printing and dyeing, food processing, storage and transportation of dangerous goods, etc., and dangerous environments with explosive gas and combustible dust.

Power supply：

 Working voltage: 100VAC～240VAC, working current: ≤1000mA

Camera Electrical Specifications：

 For the technical specifications of the camera, please refer to the instruction manual of the optional product。

Wiper parameters:

 The default transmission control protocol of the wiper camera from the factory is: PELCO-D, 2400 bps. The address code is: 1;

The network type explosion-proof wiper camera has been connected to RS485 and does not need to be set separately; the analog camera is set according to the following conditions:  

    ①Transmission mode: master-slave, half-duplex, RS485;

    ② Communication rate: 2400 bps / 4800 bps / 9600 bps / 19200 bps

    ③ Communication protocol: PELCO-D, PELCO-P (other protocols are customized according to customers)

    ④The wiper switch can be controlled by the RS485 controller.